Mansfield plastics firm fined after worker was crushed to death in unguarded machine

A Mansfield plastics company has been fined £277,500 after an employee was fatally injured when he became trapped in the moving parts of an unguarded machine.

Paul Whalley, 46, was employed by Reflex Flexible Packaging Ltd at their factory on Amber Drive, Langley Mill, when the incident occurred, on May 29, 2020.

Mr Whalley entered an opening in the side of a plastic conversion machine that permitted whole-body access to dangerous moving parts, said a spokesperson for the Health & Safety Executive (HSE).

The area contained several unguarded mechanisms, and Mr Whalley became trapped in the machine.

Reflex Flexible Packaging Ltd, on Hamilton Way, Mansfield. (Picture: Google Earth.)placeholder image
Reflex Flexible Packaging Ltd, on Hamilton Way, Mansfield. (Picture: Google Earth.)

Despite efforts by the emergency services, including cutting conveyor belts and rollers to free him, he sadly died at the scene from crush asphyxia.

An investigation by the HSE found that Reflex Flexible Packaging Ltd failed to carry out a suitable and sufficient risk assessment for operation of the machine.

The company had not installed appropriate guarding to prevent access to dangerous parts and had no written safe systems of work or isolation procedures in place.

HSE guidance states that employers must take effective measures to prevent access to dangerous parts of machinery.

This typically involves fixed guarding, but where routine access is required, interlocked guards may be needed to stop movement before a person can reach the danger zone.

Reflex Flexible Packaging Ltd, of Hamilton Way, Mansfield, pleaded guilty to breaching Section 2(1) of the Health and Safety at Work etc. Act 1974.

The company was fined £277,500 and ordered to pay £20,000 in costs at Derby Crown Court on November 5.

Following the hearing, HSE Inspector Lee Greatorex said: “The accident is made worse by the fact that the company’s own internal health and safety department had identified a lack of risk assessments 18 months before the accident, but no follow-up action was taken to remedy this failing.

“This wholly avoidable incident was caused by the failure of Reflex Flexible Packaging Ltd to guard the dangerous parts of the machine Mr Whalley was operating.

"It was obvious that these moving parts were not guarded and presented a clear risk of injury.

"Had the company fitted suitable guarding, this fatality would not have occurred.”

News you can trust since 1952
Follow us
© 2026 Iconic Media Group Ltd. All rights reserved.Cookie SettingsTerms and ConditionsPrivacy notice